PTTC.PNG
Skip to main content.

зажим под гайку

Дата последнего изменения:2010.12.06
Сообщить об ошибке
  зажим под гайку
Зажим винтового типа, в котором проводник прижимают гайкой. Силу прижима могут прилагать непосредственно фасонной гайкой или через промежуточную деталь, например шайбу, прижимную пластину или устройство для самоотвинчивания.
[ГОСТ Р 51324.1-2005]
EN

stud terminal
terminal with screw clamping in which the conductor is clamped under a nut. The clamping pressure may be applied directly by a suitably shaped nut or through an intermediate part, such as a washer, clamping plate or anti-spread device
[IEC 60669-1, ed. 3.0 (1998-02)]


stud terminal
a screw-type terminal in which the conductor is clamped under a nut
NOTE – The clamping pressure can be applied directly by a suitably shaped nut or through an intermediate part, such as a washer, a clamping plate or an anti-spread device.
[IEV number 442-06-23]

FR

borne à goujon fileté
organe de serrage à vis dans lequel l'âme d'un conducteur est serrée sous un écrou. La pression de serrage peut être appliquée directement par un écrou de forme appropriée ou au moyen d'une partie intermédiaire, telle qu'une rondelle, une plaquette ou un dispositif empêchant le conducteur ou ses brins de s'échapper
[IEC 60669-1, ed. 3.0 (1998-02)]


borne à goujon fileté
borne à vis dans laquelle l'âme d'un conducteur est serrée sous un écrou
NOTE – La pression de serrage peut être appliquée directement par un écrou de forme appropriée ou au moyen d'une partie intermédiaire, tel qu'une rondelle, une plaquette ou un dispositif empêchant le conducteur ou ses brins de s'échapper.
[IEV number 442-06-23]

Тематики

  • вывод, зажим электрический

EN

  • stud terminal

DE

  • Bolzenklemme

FR

  • borne à goujon fileté

 

Внимание!

Закрыть