PTTC.PNG
Skip to main content.

ввод в эксплуатацию

Автор статьи: Шалыт Израиль Соломонович
Дата последнего изменения:2021.12.04
Сообщить об ошибке
  ввод в эксплуатацию
Событие, фиксирующее готовность изделия к использованию по назначению, документально оформленное в установленном порядке.
Примечание - Для специальных видов техники к вводу в эксплуатацию дополнительно относят подготовительные работы, контроль, приемку и закрепление изделия за эксплуатирующим подразделением
[ГОСТ 25866-83 Эксплуатация техники. Термины и определения.]

ввод в эксплуатацию
commissioning
Действия, которые предпринимаются после испытаний давлением и перед эксплуатацией, включающие в себя удаление воды, очистку, осушку и заполнение продуктом.
[ГОСТ Р 54382-2011 Нефтяная и газовая промышленность. Подводные трубопроводные системы. Общие технические требования]

ввод в эксплуатацию
start up
Действие по подготовке и переводу в эксплуатацию чистого помещения со всеми подсистемами, включая комплект документации, наличие обученного персонала, вспомогательных служб и пр.
[ИСО 14644-4:2001, статья 3.10]
EN  
FR

Параллельные тексты EN-RU

No more pulleys nor belts to adjust during start up and service
[Lennox]
Не нужно регулировать положение шкивов и натяжение ремней при вводе в эксплуатацию и во время технического обслуживания.
[Перевод Интент]

START-UP
Once the equipment has been placed in its definitive location, Schneider Electric CPCS factory-trained service personnel will energize and check the functionality of the equipment in all modes of operation and conduct various tests to obtain internal power supply voltage readings, temperature, pressure and other critical checks.

CPCS - Critical Power & Cooling Services
[Schneider Electric]


Putting into operation vs. Commissioning

Hello!
What is the difference in the use of terms "commissioning" and "putting into operation"?
Are they absolutely interchangeable or there are certain tints in their meaning, which limit their applicatoin in this or that context?
=======================================

I am an engineer who works in the field, commissioning equipment.

Commissioning is the process where everything associated with the equipment is fully checked, all items are simulated or caused to happen, all possible events are tested, all methods of failure are accounted for. In other words, the complete design of the equipment is tested. Then, and only then, equipment is run and shown to be according to the design.

This is commissioning.

You could put equipment into operation without fully checking all systems. You can just run equipment and hope that all safety systems work according to plan.

That is the difference. No manufacturer or reputable engineering firm would simply put equipment into operation.
[http://www.usingenglish.com/forum/threads/136100-Putting-into-operation-vs-Commissioning]

Тематики

  • система техн. обслуж. и ремонта техники

EN

  • BIS
  • breaking-in
  • breakingin
  • bringing into service
  • commission
  • commissioning
  • gate in
  • going into operation
  • implementation
  • installation
  • intitation into service
  • placing on production
  • putting into operation
  • putting into service
  • start up
  • start-up
  • start-up service
  • starting-up
  • startup

 

Внимание!

Закрыть